![]() ![]() Compounding the issue is that the front brake has its own adjuster, but using it properly is a little more complex than normal (see their videos for more explanation.)Īnother way of looking at how it works and the effect on power is that you've got a normal rear brake you can set up and use however you want, and for your front brake someone put an arbitrarily sized block of material between the lever and the bar so the lever will always bottom out against it at a certain point in its travel.Īny loss of grip between the rear pads and rim, or any mechanical failure of the rear brake, will keep the front brake from operating, rendering the bike brakeless. For a rider that simply will never use their barrel adjusters, SureStop is much more dangerous. Their marketing/product material touts the line that they're a pure, unequivocal upgrade over conventional systems, which is not correct because they reduce the overall amount of braking power available.Īnother safety drawback, especially for novice or fearful users that might be most drawn to the system, is that not adjusting the rear brake's barrel adjuster as the rear pads wear will create a situation where the entire bike has inadequate or no brakes much faster than in a conventional two-lever setup. They are adequately powerful for most purposes when set up correctly. ![]() Maximum braking power is decreased compared to a normal system owing to the aforementioned one-size-fits-all design assumptions, which have to be conservative for the system to do its thing, which in the scheme of things probably makes them less safe for most people, not more. Movement between the two generates the cable movement, same as a brake lever.) Some assumptions are built-in about weight distribution and total weight on the bike, and the manufacturer chose a distance for the slidey bit that will keep the front brake from ever being able to lock if those assumptions are correct. (The head of the cable is in the moving pad, and the stop for its housing is a stationary part of the pad. ![]() One of the rear pads has a spring-loaded sliding mechanism where forward momentum captured from the back wheel when braking causes it to slide forward and actuate a cable going to the front brake, which is controlled only in this manner. You've got a brake lever and a rear brake both with typical mechanical advantage characteristics. Because the front and rear brakes are linked in SureStop, it's unclear to me how they are "separate." How do they do this? It appears to be more complex than a dual-cable brake lever - i.e., there seems to be some fore-aft balancing magic that's going on.īonus question: If the rear pad loses traction against the wheel (for example: it wears down to its nubbins, slips off the rim, or the rear brake cable breaks), does the user lose all braking - front and rear? Does this then violate the redundant brake regulation in bicycle consumer sales laws?įor example, Japan's JIS 9301:2010 regulations requires "separate braking systems operating on the front and rear wheels respectively" and SureStop says that they are compliant with this standard. They say their technology can prevent end-overs as well as skid-outs. They seem to be mainly appealing to the safety / children / new bike owner's market. Contact us if you need to order a replacement buckle if one is broken.There's a new braking system put out by a company named SureStop that controls both front and rear cantilever (side-pull) brake systems with a single brake lever. It is vital that the buckles on this product are correctly fitted. ![]() Ask your Manual Handling adviser for individual guidance.Ĭorrect Buckle Threading: Click here to view a video showing the correct way to thread a buckle onto the webbing. Always select the most appropriate equipment for the patient’s current condition and if in doubt, use mechanical equipment. Never jeopardise your health by straining, twisting or being incorrectly positioned when manual handling. If any procedure is not comfortable or is difficult and puts the carer or patient in a dangerous position, the participants should call out to stop the manoeuvre, recover and recommence. When training, practise with an able-bodied colleague. They will not make the carer stronger or fitter, but with correct training and use of the products, should make manual handling easier and safer for both staff and patients. General Manual Handling Warning: Manual Handling products are designed to assist carers to help patients. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |